Turning Insert Size Chart: ISO Dimensions for Common Insert Codes (mm & inch)
When you reorder inserts, the code is the size. This chart collects the nominal dimensions of the turning inserts buyers ask us about most, so you can confirm a replacement in seconds — inscribed circle (IC), thickness (S), fixing hole (D1), nose radius (RE), and usable edges — in millimetres, with the ANSI designation used in North America.
Negative inserts (double-sided)
| ISO code | ANSI | IC (mm) | Thickness (mm) | Hole (mm) | Nose radius (mm) | Usable edges |
|---|---|---|---|---|---|---|
| CNMG120408 | CNMG432 | 12.7 | 4.76 | 5.16 | 0.8 | 4 |
| CNMG120404 | CNMG431 | 12.7 | 4.76 | 5.16 | 0.4 | 4 |
| WNMG080408 | WNMG432 | 12.7 | 4.76 | 5.16 | 0.8 | 6 |
| WNMG080404 | WNMG431 | 12.7 | 4.76 | 5.16 | 0.4 | 6 |
| TNMG160408 | TNMG332 | 9.525 | 4.76 | 3.81 | 0.8 | 6 |
| DNMG150608 | DNMG442 | 12.7 | 6.35 | 5.16 | 0.8 | 4 |
| SNMG120408 | SNMG432 | 12.7 | 4.76 | 5.16 | 0.8 | 8 |
| VNMG160408 | VNMG332 | 9.525 | 4.76 | 3.81 | 0.8 | 4 |
Positive inserts (single-sided)
| ISO code | ANSI | IC (mm) | Thickness (mm) | Hole (mm) | Nose radius (mm) | Usable edges |
|---|---|---|---|---|---|---|
| CCMT09T308 | CCMT32.52 | 9.525 | 3.97 | 4.4 | 0.8 | 2 |
| CCMT09T304 | CCMT32.51 | 9.525 | 3.97 | 4.4 | 0.4 | 2 |
| CCMT060204 | CCMT21.51 | 6.35 | 2.38 | 2.8 | 0.4 | 2 |
| DCMT11T308 | DCMT32.52 | 9.525 | 3.97 | 4.4 | 0.8 | 2 |
How to use this chart
- Read the code off the box or the insert (worn off? Use our free photo identification: /insert-identification).
- Match the full code here — same shape letters but a different size pair (for example 09 vs 12) is a different insert and will not seat in the same holder pocket.
- Check the hole diameter against your holder's pin/clamp if you are switching brands; the IC and thickness decide the pocket, the hole decides the clamping fit.
- Nose radius is the last pair of digits: 04 = 0.4 mm (finishing, lighter cuts), 08 = 0.8 mm (general purpose), 12 = 1.2 mm (heavy, rigid setups).
Dimensions are nominal ISO values; tolerance class (the third letter of the code) sets the allowed variation — see our code-decoding guide: /blog/how-to-read-insert-code.
Can't find your code?
Send the code — or three photos of the insert — on WhatsApp and we will confirm the size and the matching options we can supply. WhatsApp: https://wa.me/8617745168691
